Internal Doors 1P Shaker Prime RD11

Internal White Primed Doors

Elevate your home with our Internal White Primed Doors, designed to complement a range of modern and classic interiors. Featuring a timeless 1P Shaker design and solid core construction, these doors offer a balance of style, durability and quality.

The white primed finish provides a smooth base for your chosen topcoat colour, allowing you to customise the look to suit your interior. Pair your doors with your preferred hardware to create a stylish and cohesive finish throughout your home.

Product Features

Need Help Choosing the Right Door Size?

Not sure which door size you need? Send us your door opening measurements and requirements. Our team will help you determine the most suitable option and provide a free quote.

Request a Quote Online

Care and Maintenance

1. If trimming is required, remove material evenly from both sides of the door. For doors with lipping of 10mm or more, each side may be trimmed by a maximum of 5mm.
2. Do not step on door units, as this may cause damage.
3. Carry doors when moving them. Avoid dragging or rubbing them against other doors or surfaces.
4. Keep internal doors away from extreme heat and humidity, which may cause damage. Store doors flat on a level surface in a dry, well-ventilated building with controlled temperature and humidity.
5. Three hinges are recommended for improved stability and longevity.
6. Clean doors with a damp cloth. Do not hose them down or use harsh chemicals or abrasive cleaners. Lightly oil the hinges when needed.

Finishing Instructions

1. Ensure all surfaces are clean and dry before applying the finish. Sand away any handling marks.
2. After sanding, remove all dust and debris with a clean, dry cloth.
3. Remove raised grain, scuffs and other surface blemishes using 120, 150 or 180-grit sandpaper. Sand carefully in the direction of the grain to avoid cross-grain scratches.
4. Where alterations expose bare timber or remove the primer, reseal the affected areas appropriately. White primed doors must receive a suitable final topcoat.
5. Ensure all door surfaces are properly finished, including the top and bottom edges where applicable.
6. Oil-based sealers or primer coats may provide a suitable base for finishing. Check compatibility with the chosen topcoat before application.
7. Select a topcoat suitable for the intended application. For external doors, lighter colours are recommended, with a Light Reflectance Value (LRV) of at least 55%.